banner

Knowledge

Home>Knowledge

Causes and solutions for pellet machine blockage?(2)

2025-01-16 10:04:06


The reasons and solutions for pellet machine blockage are as follows:

6. Bearing damage, solution: Replace the bearing with good quality, and regularly refuel and maintain it

7. The moisture content of the material is too high or too low. Solution: Choose the right raw material, or use a dryer to make the moisture content of the material meet the requirements.

8. The compression ratio of the ring die is too large. Solution: Replace the ring die with a suitable compression ratio

9. The ring die roller is seriously worn. Solution: Replace the failed ring die roller

10. Scraper problem, solution: replace or reassemble the deflection scraper

If you want to know more about our pellet machine, welcome to subscribe to our YouTube channel.