The use of biomass pellet machine is as follows
Inspection and preparation: Make sure all parts are installed correctly and tighten the screws, adjust the position of the pressure roller, and perform an idling check before starting.
Feeding: After confirming that the machine is running normally, gradually feed the material and control the feeding speed and amount.
Adjustment: Adjust the pressure, temperature and other parameters according to the quality of the pellets until satisfactory pellets are produced.
Shutdown: Stop feeding before the end. After the silo is emptied, a small amount of oil can be added to lubricate the mold.
If you want to know more about our pellet machine, welcome to subscribe to our YouTube channel.