The crusher is related product of the pellet machine.
The complete conveying process of the crushing section includes conveyors, crushers, cyclones, centrifugal fan, fans, bag dust collectors and other equipment. The cut pieces pass through the conveyor and enter the crusher for crushing. The crushed materials fall to the bottom through the screen. The fan pulls the materials out of the crushing chamber and enters the cyclone separator through the pipe. The materials and wind are in the cyclone separator. Spiral, the material goes down, and the filtered air enters the upper part through the cyclone dust collector. The fan draws it over and enters the bag dust collector at the rear. Through the bag dust collector, the clean air is discharged, and the fine dust enters the bottom of the bag dust collector. We regularly Clean up. This is the configuration process of the entire crusher. When selecting various components, we must pay attention, especially the fan, which must be matched according to the product and must be large enough. The cyclone separator also needs to be matched with the fan and needs to deal with the air volume generated by the fan. The bag dust collector also needs to match the model. Because the number of bag dust collectors will directly affect the air volume of the fan. The production capacity of the crusher depends on many factors. The first is the size of the crusher's own production capacity, which is the area of its screen. The second is the size of the supporting equipment, especially the size of the fan, which directly determines the cyclone separator and bag dust collector. The size of the device. The air closer also needs to be matched, which determines the discharge volume. Conveyors should also be selected based on output. Therefore, the entire configuration of the crusher is a configuration that must correspond to each other. If you choose our equipment, our company will select matching crushing process equipment according to customer needs.
Please click to view the video.