The protection method of wood chip pellet machine reducer is as follows
1. Lubrication: The oil level of lubricating oil reducer should be checked frequently. It is recommended to use 18-22 hyperbolic gear oil for lubricating oil, and oil with high viscosity should be used in summer. Drain the oil and replace it with new oil after the first 500 hours of operation. The oil level of reducer should be checked frequently, and the amount of lubricating oil added should be based on the safe oil level.
2. The oil level of gear reducer should be checked frequently. If the oil level is lower than the specified position, add lubricating oil frequently to prevent excessive addition and oil leakage. The gearbox mechanical oil should be replaced after 500-1000 hours of mechanical operation, and others should be replaced after 300 hours.
3. Check the bolts of hoisting reducer frequently to prevent running. If there is any looseness, tighten it in time.
4. After each shift of wood chip pellet machine, remove the dust on the surface of the equipment.
5. Overhaul the equipment once every six months or one year and replace wearing parts. The overhaul of each equipment depends on the operation situation.
6. The indicator lights, air switches and travel switches of the electrical system should be checked regularly and replaced in time if damaged.
If you want to know more about our pellet machine, welcome to subscribe to our YouTube channel.