If the temperature is too low, not only the raw materials cannot be formed, but also the power consumption increases; if the temperature increases, the motor power consumption decreases, but the forming pressure decreases, the formed product is not squeezed solid, the density decreases, it is easy to break and damage, and the surface of the pellets is overheated and burnt, and the smoke is large.
Although the JNSHARE biomass pellet machine does not have an external heat source for heating, the friction between the raw materials and the machine parts can also heat the raw materials to 100°C during the forming process, and can also soften the lignin contained in the raw materials and act as a binder. Finally, it is formed after cooling.
Of course, the above conditions are under ideal conditions of many factors such as the strength of the biomass raw materials, the pressure of the rollers, the compression ratio of the mold, the feed amount, and the moisture content of the raw materials.
Therefore, if you want to form biomass pellets well, you must have the above points as a prerequisite. If you want to find out the reasons why the biomass pellet machine is not well formed, you need to check them one by one. JNSHARE engineers will find the reasons for you accurately according to the production conditions on site.
If you want to know more about our pellet machine, welcome to subscribe to our YouTube channel.